Lowboy Trailers

FULLY LOADED MODEL 

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock
• 13 HP Honda mounted over Kingpin (fully loaded configuaration)

Deck

• 4 full depth 14″ cambered deck beams
• 26′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Covered wheel wells – (3) piece raised bolt on style (Fully loaded configuration)
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

STANDARD MODEL

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock

Deck

• 4 full depth 14″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

SPECS: (vary based on fully loaded, standard and demo models)

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 53′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock
• 13 HP Honda mounted over Kingpin (fully loaded configuaration)

Deck

• 4 full depth 14″ cambered deck beams
• 26′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Covered wheel wells – (3) piece raised bolt on style (Fully loaded configuration)
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

Standard Model 

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

*LIMITED AVAILABILITY*

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

*LIMITED AVAILABILITY*

CALL FOR MORE SPECS 

NO FET!

General

110,000# Capacity in 12′ load concentration
100,000 / 80,000 psi yield steel mainbeams
Est weight (lbs.) 22,390 not including attachments, +/- 5%
Overall Length: 53′ 0″ not including attachments
102″ wide (deck and axles) 44″ O/O inner beams
Hendrickson Air-Ride
Gooseneck

Hydraulic non-ground bearing Scraper neck
12′-9″ gooseneck with 110″ & 86″ swing
51″ 5th wheel height – Adjustable 5 position ride height ratchet
High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
Air activated, self-locking pin on gooseneck, positive safety lock
Hydraulic power from tractor source
LED Work Lights rear-facing on gooseneck
Deck

4 full depth 12″ cambered deck beams
25′ deck length – flat
13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
Alternating 8″ & 4″ crossmembers on 12″ centers
18″ loaded deck height with 6″ loaded ground clearance
2″ nominal intrack area bolted at all board ends
Open in center of deck
Outriggers: 13 Pair swing out – removable
Wide Load Package – gussets behind each outrigger
Boxed Front Approach & Upper Flange Reinforcement
Bent D-rings- 6 per side, mounted to reinforcement
Recessed last 8′ of deck with Pierced steel plate
Pierced Steel tool box – 60″ at front
30″ front flip ramps – bridge style spring assisted
42-degree radius to subframe – ramp to subframe
Subframe

Frame reinforcing & connections for future stinger (4 axles total)
Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
Three 27,500 lb axles – 5″ x 3/4″ wall
Axle spacing: 60″
Twelve 255/70R22.5 H radials
Alum/steel wheels-outside polished
16.5″ x 7″ drum brakes, no ABS
Spring brakes on 2nd axle
Three tail light package with strobes
Boom trough, open to tailgate
Flush mount bolsters with open wheel wells
Wide Load sign pockets (no sign)
Lowered crossmembers in subframe
4 Pair Flat D-Rings mounted on upper flange

FOR LOAD KING LOWBOY

PRICE + FET

FOR BOOSTER  ON LOAD KING LOWBOY

PRICE + FET

DEMO UNIT, 25 FT DECK, AIR LIFT 3RD AXLE, OUTER ALUMINUMS, 8’6″ WIDE, COVERED WHEEL WELL COVER

BASE TRAILER $119,500.00

4TH AXLE WITH SPREADER BAR $35,000.00