Load King

FULLY LOADED MODEL 

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock
• 13 HP Honda mounted over Kingpin (fully loaded configuaration)

Deck

• 4 full depth 14″ cambered deck beams
• 26′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Covered wheel wells – (3) piece raised bolt on style (Fully loaded configuration)
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

STANDARD MODEL

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock

Deck

• 4 full depth 14″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

FET PAID!

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock

Deck

• 4 full depth 14″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 52′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock

Deck

• 4 full depth 14″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

SPECS: (vary based on fully loaded, standard and demo models)

General

• 120,000# capacity in 12 load concentration with stinger
• 100,000/80,000 psi yield steel mainbeams
• Overall Length 53′-11″ not including attachments
• Est. Weight 26,130 lbs. not including attachments
• 102″ wide (deck and axles)
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• Work lights on gooseneck
• 12′-9″ 110″ & 86″ swing w/conn for 36″ flip box, 146″ swing
• 51″ 5th wheel height – adjustable with 5 position ratchet
• High clearance frame recess with hydraulic frame lift support arm
• Air-activated, self-locking pin gooseneck. Positive safety lock
• 13 HP Honda mounted over Kingpin (fully loaded configuaration)

Deck

• 4 full depth 14″ cambered deck beams
• 26′ deck length – flat
• 13 Pair chain slots in outer flanges
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 20″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal in track area bolted at all board ends
• Open in center of deck
• Outriggers 13 pair swing out – removable
• Box Front Approach & Upper Flange Reinforcement
• Bent D-Rings – 6 per side, mounted to Reinforcement
• Recessed last 8′ of deck with pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted.
• 39 degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger & 2 Flip axle (5 Axles total)
• Air lift 3rd axle w/manual raise & lower valve. +3/-3 off leveling valve
• Three 27,500 lb axles- 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 275/70R22.5 H radials
• Alum/stell wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on axle 2
• Three tail light package with strobes
• Boom trough, open to tailgate
• Covered wheel wells – (3) piece raised bolt on style (Fully loaded configuration)
• Wide Load Sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on Upper Flange

Standard Model 

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

FET PAID! 

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

*LIMITED AVAILABILITY*

General

• 110,000# Capacity in 12′ load concentration
• 100,000 / 80,000 psi yield steel mainbeams
• Est weight (lbs.) 22,390 not including attachments, +/- 5%
• Overall Length: 53′ 0″ not including attachments
• 102″ wide (deck and axles) 44″ O/O inner beams
• Hendrickson Air-Ride

Gooseneck

• Hydraulic non-ground bearing Scraper neck
• 12′-9″ gooseneck with 110″ & 86″ swing
• 51″ 5th wheel height – Adjustable 5 position ride height ratchet
• High Clearance Frame Recess with Hydraulic Frame Lift Support Arm
• Air activated, self-locking pin on gooseneck, positive safety lock
• Hydraulic power from tractor source
• LED Work Lights rear-facing on gooseneck

Deck

• 4 full depth 12″ cambered deck beams
• 25′ deck length – flat
• 13 Pair chain slots in outer flanges for 3/8″ & 1/2″ Chain
• Alternating 8″ & 4″ crossmembers on 12″ centers
• 18″ loaded deck height with 6″ loaded ground clearance
• 2″ nominal intrack area bolted at all board ends
• Open in center of deck
• Outriggers: 13 Pair swing out – removable
• Wide Load Package – gussets behind each outrigger
• Boxed Front Approach & Upper Flange Reinforcement
• Bent D-rings- 6 per side, mounted to reinforcement
• Recessed last 8′ of deck with Pierced steel plate
• Pierced Steel tool box – 60″ at front
• 30″ front flip ramps – bridge style spring assisted
• 42-degree radius to subframe – ramp to subframe

Subframe

• Frame reinforcing & connections for future stinger (4 axles total)
• Ail ift 3rd axle w/manual raise & lower valve, +3/-3 off leveling valve
• Three 27,500 lb axles – 5″ x 3/4″ wall
• Axle spacing: 60″
• Twelve 255/70R22.5 H radials
• Alum/steel wheels-outside polished
• 16.5″ x 7″ drum brakes, no ABS
• Spring brakes on 2nd axle
• Three tail light package with strobes
• Boom trough, open to tailgate
• Flush mount bolsters with open wheel wells
• Wide Load sign pockets (no sign)
• Lowered crossmembers in subframe
• 4 Pair Flat D-Rings mounted on upper flange

*LIMITED AVAILABILITY*

CALL FOR MORE SPECS 

26′ DECK, 9′ WIDE, 3 AXLES W/ TANDEM AXLE, AIR RIDE MECHANICAL SUSPENSION/CALIFORNIA LEGAL, NEW FLIP OVER GOOSENECK EXTENSION, SWING OUTRIGGERS

FOR LOAD KING LOWBOY

PRICE + FET

FOR BOOSTER  ON LOAD KING LOWBOY

PRICE + FET